Sentence examples for arrays yields a from inspiring English sources

Thermal evaporation of Ag onto the nanopillar arrays yields a high density of Ag NPs on both the tops and sidewalls of the nanopillars, similar to the nanoislands growth described above in the context of the Ag NW stacked plates.

With the extra aid of antireflection coating, the sufficient optical absorption of 20-μm-thick c-Si with a double-sided 1400-nm INP arrays yields a photocurrent density of 39.86 mA/cm2, which is about 76%% higher than the flat counterpart (22.63 mA/cm2) and is only 3%% lower than the value of Lambertian limit (41.10 mA/cm2).

Due to the enlargement of the internal surface area within the branched nanostructure photoelectrode, the DSSC consisting of branched hierarchical ZnO nanowire arrays yields a power conversion efficiency of 0.88%, which is almost twice higher than that of the DSSC fabricated using bare ZnO nanowire arrays.

The 5 arrays hybridized above, coupled with the previous 12 arrays, yields a pool of 17 arrays.

Hybridization and analysis of these arrays yields a sequence for each target gene homolog present in the sample; the sequence is then matched to a species and strain by comparison against a sequence database, using BLAST [ 14].

Dye-sensitized solar cells with these Ag NP-deposited TNT arrays yielded a higher power conversion efficiency (2.03 %) than those without Ag NPs (1.39 %).

On the other hand, the DSSC fabricated from Ag nanoparticle-deposited TNT arrays yielded a conversion efficiency of 2.03 % (VOC = 0.76 V, JSC = 5.0 mA cm−2, FF = 0.54) (Fig. 6b).

In the region far away from the surface, therefore, the electrode array yields a flat, repulsive mechanical potential for polar molecules in lfs states: a mirror.

More importantly, the optimized Bi2MoO6 nanosheet array yields a photocurrent density of 220 μA/cm2, which is more than two orders of magnitude higher than that of conventional Bi2MoO6 particles (1.8 μA/cm2).

For example, at a false positive rate (FPR) of 0.05, the tiling array yields a sensitivity of 0.68 while RNA-Seq attains a sensitivity of 0.85.

However, the heat transfer enhancement caused by a fan being placed at either edge of the fin array yielded a dissimilar result between both of the fin array orientations because of the superimposed effects of the boundary layer development and the air flow induced by the fan.