Sentence examples for array was configured from inspiring English sources

The fingertip-shaped OTFT array was configured for use as a robot finger for precision work such as palpation or surgery using a sensitive tactile sense.

The detection array was configured to measure 204Pb + in the electron multiplier set on the trolley position L2, 206Pb + in L1, 207Pb + in C (placed on the ion optical axis) and 208Pb + in H1.

In [10], both the transmit and the receive array are configured as uniform circular arrays UCAs.

Each antenna of receive array is configured to a digital receiver whose received data is sent to the high-speed signal processor, including digital beamforming (DBF), matched filter (MF), and Doppler processing basically.

The spectroradiometer utilized a 2048-element linear silicon CCD array and was configured with a 50-μm slit and a grating (groove density, 600 mm-1; blaze wavelength, 400 nm; grating 2, Ocean Optics), resulting in an effective spectral resolution of 2.06 nm (FWHM) between 200 and 950 nm.

The spectroradiometer utilized a 1024 × 58-element square silicon CCD (charge-coupled device) array and was configured with a 25-μm slit and a variable blaze wavelength grating (HC-1, groove density = 300 mm-1; Ocean Optics), resulting in an effective spectral resolution of 1.9 nm (FWHM) between 200 and 950 nm.

The implemented processing structures are based on a systolic array with 8×8 PEs, which was configured to support the computation of the transforms defined in the AVC, AVS and VC-1 standards, as well as the 4×4 and 8×8 HEVC transforms, by using the PEs presented in Section 4.2.

The Taguchi trial for ocular lens hardness was configured in L16 orthogonal array, by five control factors, each with four level settings.

It was configured so that the array lifted up slightly as it was towed along.

The Taguchi trial for ocular lens hardness was configured in an L16 orthogonal array, by five control factors, each with four level settings.

Each coil was configured as a 4-channel array.