When the memristance variation is as low as 0%, the recognition rate of the analog memristor array is higher by 6.8% than the binary memristor array.
Facet population data indicate that ~40% of the total intensity corresponds to {114} facets, and ~40% to {113} and {112} facets; therefore, the relative number of high-slope facets in the array is higher for this higher T g value.
The n-type conductivity of 15-nm NW array is higher by about a factor of 2 compared to that of the 100-nm ZnO NWs, and both can be greatly enhanced by UHV annealing.
It represents that the density of nanopillar array is higher for 'Ag 5 wt%-4,000 rpm', which leads to the larger effect of anti-reflection than 'Ag 3 wt%-2,000 rpm'.
(2) The background noise levels of the GPS array are higher than the seismometer, but the GPS array seems better in a very low frequency range (roughly < 0.3 mHz).
The order of array was highest in the growth condition of the dendrite close to the cell-to-dendrite transition region.
During the first day, the peak output power from the PV array was higher than the set power output level.
Note that conductivity in the 3D array was higher than that in the 2D array, even though the total thickness of the QDSL expanded.
The hybridization-control probes produced signals at compatible levels in both arrays, although signals in antisense array were higher (Fig. 1).
This antireflective effect may be stronger than the light-trapping effect arising from the increase of the silicon nanowire arrays, which can also be deduced from the EQE spectra the EQE in the hybrid solar cell with shorter nanowire arrays is higher than the cell with longer nanowire arrays in the short wavelength region.
Note from the two last columns in Table 3 that the accuracy obtained from either the average of LLR scores or the FI-based fusion of the whole set of arrays is higher than the accuracy obtained from any of the single arrays.
