Sentence examples for array increases with from inspiring English sources

Based on the results of the present study, the effect of biofouling on wave elevation is noticeable; the damping effect of the cage array increases with increasing level of biofouling.

For example, in [22], it was shown that SERS signal of adenine molecules deposited on an ordered Ag nanoparticle array increases with the increased particle size and decreased with the interparticle distance.

In Fig. 3a, it is interesting to note that the location of the first peak has a right shift with NW density increasing, corresponding to the increase of the propagation time through nanowire arrays, i.e., the thickness of nanowire array increased with NW density increasing.

The periventricular mitotic array near the ventricular lumen appeared to be continuous and only one to three cells deep in 'thick' 20 μm sections at E12 E14 in control mice, although cell density within the array increased with age.

In the example provided in Figure 2F, a comparison of liver and spleen tissue from the same donor, both test (liver) and reference (spleen) signal intensities for clones on the array increase with increasing clone GC content, and the observed log2 ratios decrease with clone GC content.

The stability of such arrays increases with increasing nitrogen content, reaching an ideal 100% level for the Ti 50 at%N alloy films.

This is the main reason why the OR in metal nanowire arrays increases with temperature in the low-temperature regime.

The absorption spectra reveal that the optical absorption of the as-grown CNNC arrays increases with increasing CH4/N2 ratio and show a very good absorption in a wideband of 200 to 900 nm at the CH4/N2 ratio of 1/5.

The FE properties of CdS nanotube arrays increase with the increase of l/t.

It can be observed from Figure 4 that the absorption of SiNW arrays increased with increasing SiNW length.

To form deeper hole arrays in the silicon, etching time was prolonged from 30 s to 1 min. The depth of the silicon nanohole arrays increased with increasing etching time.