Sentence examples for area of sheet from inspiring English sources

In this paper, we will summarize the research activities conducted at the Advanced Materials Processing Laboratory at Northwestern University in the area of sheet metal forming.

To the best of our knowledge, there has been no review article published in the literature in the area of sheet explosives.

This review presents the work carried out by the international community in the area of sheet explosive formulations and its applications in various systems.

This effect could be assigned to cryogelation of carbon sheets leading to a decrease in the specific surface area (from 1841 to 533 m2/g) representing the area of sheets that are accessible for water that is unfrozen at subzero temperatures.

According to the brace-arch model and a further parametric study, it was found that the bearing load of a strengthened beam without additional anchorage increased with the concrete strength and that the calculated capacity of a strengthened beam increased with the sectional area of sheets in a more effective rate when U-shaped strips were applied.

The highest CF value of 6.12 F cm−2 is obtained for the NiCo2O4/NiSx electrode evaluated by using the galvanic charge/discharge curves at the current density of 1 mA cm−2, due to the superior intrinsic property of NiSx other than its high surface area of the sheets-on-sheets morphology since the structure variation is almost excluded in the work.

Although tumors from both sets of mice showed areas of sheets of cells and areas of differentiation and necrosis, there was a trend for the tumors from the STGal-I/PyMT mice to be more differentiated although this did not reach significance, P = 0.086.

There is a gap of about twenty miles to the south of Peronne, but the advance of the Allies will no doubt soon bring this part of the battle-line within the area of the sheet.

Due to the flow characteristics in a GWW, an area of shallow sheet flow on the side-slopes and another of concentrated flow along the thalweg can be identified.

As a result, it reduces the diameter of semi-bulkyball or area of graphene sheet formed on base, leading to decrease in the diameter of grown CNTs.

The cross-sectional area of the sheet was determined based on the number of each fiber roving and its cross-sectional area estimated using the roving weight and Specific Gravity (ρ CF  = 1.8; ρ GF  = 2.54), where the weight was measured using a micro-digital scale with an accuracy of ±1 × 10−5 g.