Sentence examples for area of absorber from inspiring English sources

An experimental study was conducted to improve the productivity of basin solar stills by increasing the surface area of absorber (base of still) and rate of heat transfer between saline water and absorber.

The results obtained may be useful to the researchers and designers working in the area of microwave absorber theory, technology and engineering.

The various factors affecting the productivity of solar still are solar intensity, wind velocity, ambient temperature, water glass temperature difference, free surface area of water, absorber plate area, temperature of inlet water, glass angle and depth of water.

At design point conditions, the main design parameters obtained are a membrane contactor area of 6.06 m2, a ratio of the mass transfer area to absorber net volume (Am/Vnet) of 130.1 m2/m3), and ratio of the membrane area (mass transfer area) in this design configuration to the area required for heat transfer is 1.162, respectively.

This plant has a collector field area of 1864 m2 of absorber surface and an MED (multiple effect distillation) unit for seawater desalination with a capacity of 120 m3/day of distilled water.

An optimum area of the vertical still absorber was found to be 3.5 m2.

Because the system is designed with an upward tilt, gravity then forces the condensed fluid to flow back down to the area of the hot solar absorber, where it undergoes the heat-gathering, heat-releasing cycle again.

Small sized silicon solar cells based on the Laser Grooved Buried Contact (LGBC) technology having an absorber area of 1 cm2 are utilised in the system.

The system with a total absorber area of 0.45 m2 has achieved a peak flow rate of 19.3 kg/h of treated water.

The collector field used in this study consists of 1064 evacuated tube collectors; each one has an absorber area of 1.75 m2.

The test unit has an absorber area of 1.3 m2 and can hold 170 l of water, of which extractable volume per day is 100 l.