The phrase "are the depth" is not correct in standard written English.
It may be intended to refer to a specific measurement or quality, but it lacks proper grammatical structure.
Example: "The measurements are the depth of the water in the lake."
Alternatives: "is the depth" or "represents the depth".
At issue are the depth of cutbacks in items like day care slots or AIDS prevention plans, or the hours at libraries and parks services.
The machining parameters which are chosen to be evaluated in this study are the depth of cut (d), cutting speed (S) and feed rate (f).
Four geometry variables which are; the depth, tip length, pitch and orientation of the cavities are taken into account in order to optimize the aluminum heat sink design.
The performance of a jet pump is different for different cases as the parameters affecting it are the depth and the angle of placement.
These are the depth profile of the elements of the ALD TiO2/Al2O3 dielectric stack on doped (1017 to 1018 cm-3) and undoped epi-GaAs structures.
The two parameters, which are most sensitive to the primary composition, are the depth of the shower maximum and the total number of muons in the shower.
Using a finite difference method, a linear long-wave model is numerically solved to calculate tsunami propagations over the global ocean in a transformed spherical coordinate (Inazu et al., 2012; Saito et al., 2013): (1) (2) (3)where Q and η are the depth-integrated horizontal velocity and the tsunami height, respectively.
Both COMCOT and XBeach solve the following depth-averaged nonlinear shallow water equations to obtain the near-shore velocity field, (1) (2) (3)where η is the surface elevation; h is the total water depth; u, v are the depth-averaged velocities in x- and y- directions, respectively; g is the gravitational acceleration; c f is an empirical bed friction coefficient.
Where ρ is the density, v x,y are the depth-averaged x and y velocities, h is the flow depth, g x,y are the x and y components of gravity, k x,y are the x and y horizontal stress ratios (ratio of lateral stress to bed normal stress) calculated based on Savage-Hutter theory (Savage and Hutter, 1989), σ z is the bed normal stress, τ zx is the basal resistance, and E is the entrainment rate.
Then, jext reduces to the sheet current density J τ ext, which is calculated as, (3) where σ w is the mean conductivity of sea-water (3.2 S/m), U are the depth-integrated velocities derived from the tsunami model, er is the outward unit vector and B r m is the radial component of the geomagnetic main field as derived from POMME model (Maus et al., 2006).
(These are the depths to which we sank in our cookie depravity).
