For ATH (Figure 2g), it increased from approximately −50° (dark blue) to −20° (light blue) for 0.6 to 1 Hz.
Each level features an arrangement of approximately one hundred blue "pegs", positioned to correspond with the level's background picture, inside of three walls on the top and sides (leaving the bottom opened), along with other fixed and moving features.
For example, normal human color vision is trichromatic (i.e., has three types of cone photoreceptors) with absorbance maxima at approximately 420 (blue sensitive), 534 (green sensitive) and 564 (red sensitive) nm.
The fluorescence ratio showed a rapid (within ten minutes) localized increase at the wound site (arrows), which continued to rise throughout the duration of clotting (max ratio change approximately 4.0; blue line).
Approximately 2,500 majestic blue whales feed along California coast, the largest concentration of blues on the globe.
Sharks of age classes 0 2 represented the majority of those caught in the survey (approximately 81% of blue sharks and 58% of makos), yet there was variability in the sizes of blue and mako sharks caught by year.
Each PL spectrum was divided by two Gaussian deconvolution curves which were centered at approximately 425 nm (blue line) and 525 nm (brown line).
When fd is approximately 0.1, the blue region includes the dotted magenta line, which shows the grain size satisfying St = 1 at R1 ∼ 0.5.
In Figure 5b, we can see that for the first 6 to 7 min of this chosen time frame, the polarization angle is negative (approximately −10°, light blue) or close to 0° (light green), then changes to positive (approximately 15°, yellow) for about 9 min, only to return to negative (approximately −40°, dark blue) for a few minutes before finally stabilizing to positive values.
Raman spectroscopy indicates the presence of various defects, while photoluminescence measurements show intense green (centre wavelength approximately 515 nm) blue (approximately 450 nm), and less dominant red (approximately 640 nm) emissions due to a variety of vacancy and interstitial defects, mostly associated with surfaces or grain boundaries.
