Sentence examples for appreciable thickness from inspiring English sources

After drying, the image has a distinctive appearance in which the ink has appreciable thickness, and thin lines have less thickness than wider lines.

A difficulty with the spraying of steel on copper is the attainment of appreciable thickness of the coating due to debonding during the thermal spraying process.

Therefore, we propose that a p n junction betavoltaic cell with a thicker and heavily doped p− layer under exposure to a practical Ni-63 source with an appreciable thickness could produce the optimal energy conversion efficiency.

Usefulness of NIR spectroscopy has been demonstrated successfully in such a study of thermally induced phase transition behavior of PE samples with appreciable thickness, for which mid-IR spectroscopy is difficult to apply because of the intensity saturation of various key bands.

Shear spinning is a recently commercialised technology (www.xanofi.com) that can achieve high-yield production of integrated micro- and nano-fibre scaffolds with an appreciable thickness (up to several centimetres) necessary for the 3D cell models [ 9, 10].

Due to the appreciable thickness of the cement interlayer representative of cement mantles used in acetabular replacements, finite element solutions for stress intensity factors and strain energy release rate of a sandwich disk were obtained for selected crack lengths and moduli ratios.

For example, being merely a few cells in thickness, appreciable oxygen diffusion is possible in mouse knee articular cartilage; whereas the equivalent site in humans is several millimetres thick.

Effective average diffusivities of 1.39 × 10−6 and 1.44 × 10−6cm2s−1 have been calculated at 18 and 30°C, respectively, with no appreciable dependence on biofilm thickness.

Accordingly, OVCAR10 cells did not seem to have caused appreciable change in the thickness of matrices (compare signals derived from matrix (green or red) between areas containing nuclei (blue) and areas with no nuclei in Figure 5G & H).

Thus, if a lipid bilayer moiety (or even the sole distal lipid monolayer) of a ssBLM consists of DPC GM1, an appreciable increase in film thickness upon addition of the ChTB, as monitorable by SPR, denotes lipid lateral mobility.

Surface profilometric measurements showed no appreciable difference in the thicknesses of the untreated and irradiation-treated PHPS coatings.