Sentence examples for applying the thermal from inspiring English sources

A fabrication method was designed for thermal insulation composites by applying the thermal characteristics of silica aerogels with preservation of pores in the aerogel to achieve extremely low thermal conductivity of the composites.

The base pressure of the XPS system was 5.2 × 10-9 Torr. Figure 1a,b,c,d,e,f illustrates the SEM images of Fe nanoparticles on Si(100) and Si(111) substrates at 900°C by applying the thermal chemical vapor deposition method.

By applying the thermal boundary conditions obtained by neutronics simulations for the DEMO reactor, results of finite element calculations of the breeder unit are analyzed in views of thermal hydraulics and thermal stress to identify the adherence to maximum temperatures in structural and functional materials and the abidance by the stress criterion imposed by the structural material.

Before applying the thermal filtering we remove all probes with a GC content higher that 80%, since such probes are usually difficult to synthesise and offer lower quality information [11], [19].

Thin film deposition was achieved using a radio frequency (RF) source at 90 W for 30 min at RT. From a selected sample, four equal 5 × 5 mm2 sections were cut in order to apply the thermal treatment (TT) with and without an applied magnetic field (HTT).

To extract the FRT region, we first applied the thermal frontal locator (Renard and Clarke 1965).

We also applied the thermal treatment commonly used by locals (10 min in boiling water) to two of the samples.

Secondly different models are proposed to correctly apply the thermal behavior of thermal bridges to some examples of wood-frame structure.

The energy equation is solved using a diffuse-interface method, which avoids the need to apply the thermal boundary conditions directly at the solid front.

Another point which can be noticed in Fig. 4 is that before the fluid reaches the region where the magnetic field is applied, the thermal boundary layer is growing.

The challenge in a thermally assisted process stems from the appropriateness of the design of the solid part that is utilized to apply the thermal energy to materials being processed.