Sentence examples for applying peak from inspiring English sources

The new sounds were created by applying peak and notch filters centered at 500 Hz and 2000 Hz (or vice versa), respectively, to white noise.

The next plane position is estimated from distribution of position of points by direction of the associated dominant axis applying peak estimation.

In accordance with limited amounts of STAT1 in the nucleus of unstimulated cells [13], we obtain only 356 sites if applying peak detection with identical parameters on the control ChIP-seq data set derived from unstimulated HeLa cells.

Therefore, missing some peaks is a common experience while applying peak detection methods to noisy FECG signals.

The applied peak voltage between the electrodes was about 1700 V, the repetition frequency was 15 kHz, the pulse width was 1.0 μs, and the electrode gap was 0.5 mm.

NO and SO2 removal was studied for various process variables such as applied peak voltage, initial NO and SO2 concentrations, pulse frequency, and residence time.

The applied peak voltage, gas flow rate and pressure were kept constant at 600 V, 3.32 × 10− 6 Nm3 s− 1 and 400 Pa, respectively.

While the frequency and the applied peak to peak voltage were maintained at 1 MHz and 3 V, respectively, DEP time was varied in accordance with electrodes gap size.

Experimental indentation studies were carried out to determine load unload curves of WC-Co and WC-Ni based coatings under 300 mN, 350 mN, 400 mN and 450 mN applied peak loads.

The deposition rates of Ag and Cu atoms and the bacterial inactivation times are reported in the dark and under light as a function of the applied peak currents during the sputtering by HIPIMS.

Normalized remanence intensity is plotted as a function of applied peak AF field.