Sentence examples for applying constant current from inspiring English sources
The change of the electrical resistance was measured by applying constant current and displacement amplitudes to the upper sphere contact specimen, fixing the flat specimen.
Figure 10 shows the soft breakdown (SBD) of the GeO x film by applying constant current stress on the TE.
Induced currents in short-circuited windings are found by an iterative process, in order to apply constant current densities in the model of each winding.
Potential oscillations exhibit various patterns such as periodic, quasi-periodic, mixed-mode oscillations and other different bifurcations, which are greatly effected by the applied constant current and the concentration of HCHO or H2SO4.
with i = applied constant current, t = transition time, M = molecular weight, n = number of electrons, F = Faraday constant.
Figure 6 Galvanostatic charge discharge of asymmetric assembly of supercapacitor stack having PANI/MWNTs and TiO2/MWNTs as electrode materials at an applied constant current of 10 mA.
Figure 5 Cyclic voltammograms of asymmetric assembly of supercapacitor stack having PANI/MWNTs and TiO2/MWNTs as electrode materials at a scan rate of 2 mV s−1. Figure 6 shows the galvanostatic charge-discharge behavior of the supercapacitor stack with asymmetric assembly using PANI/MWNTs and TiO2/MWNTs with an applied constant current of 10 mA in the potential range between 0 and +3 V.
Applied constant current can ensure that anodic films grow at an almost uniform rate.
This paper introduces a low-distortion switched-current (SI) sample-and-hold stage for high-performance current sampling of weak currents, by applying constant charge injection on a weakly inverted MOS transistor.
For example, transcranial direct current stimulation (tDCS) devices apply constant, low current delivered to the brain area of interest via electrodes on the scalp with the purpose of modulating brain function.
All recordings were performed without applying holding current and APs were triggered by applying small constant current pulses through the recording electrode.
