Eq. (3a) was applied to sawn wood and wood-based panels, Eq. (3b) to paper and paper board.
However, these models often apply to sawn lumber rather than logs (Simpson and Hart 2001) and generally require a good knowledge of the diffusion coefficient of the species concerned, which restricts their general application (Simpson and Wang 2003).
It is based on negative capacitance shunted piezoelectric transducers which are applied to the saw blade core.
The developed model has been applied to significant cases of saw-tooth roofs facing the equator, obtaining some annual reference patterns for these factors and variables aiming to estimate the suitability of the adopted configuration and focussing strategies as means for obtaining a seasonal control of the solar gains on the roof apertures.
When an ac signal is applied to the IDTs, two series of identical SAWs propagate toward the microchannel in opposite directions.
The left hand side abscissa scale applies to the saw-tooth curve.
Starting in the late 10th century, waterwheels, long used for grinding grain, were applied to many industrial processes that included tanning, olive pressing, sawing wood, polishing armour, pulverizing stone, and operating blast-furnace bellows.
SAW sensor technology has the potential to be applied to measure cutting forces through its indirect force measurement principle.
When a radio frequency (RF) signal is applied to both IDTs, two series of identical surface acoustic waves (SAWs) propagating in opposite directions will be generated.
That old saw about the Frenchman who asks, "It works in practice, but does it work in theory?" can now, sadly, be applied to Englishmen as well. .
