The phrase "applicable load" is correct and usable in written English.
It can be used in contexts related to engineering, physics, or any field where loads or forces are being discussed, indicating a load that is relevant or suitable for a particular situation.
Example: "The applicable load for this bridge design must be calculated to ensure safety and stability under various conditions."
Alternatives: "relevant load" or "pertinent load".
The further efforts needed for developing more applicable load shifting control strategies using the facilities are also addressed.
In addition, the main effects were identified as the pin and sheet thickness among others concerning the applicable load as well as the elongation of the joint.
A computer code has been written for the analysis, which calculates the geometry of plastic zone and the ultimate applicable load for the assumed material and geometrical characteristics of reinforced soil slopes.
By using an LP rich dual-loop EGR, a high EGR rate was attained at low, medium, and high engine speeds, increasing the applicable load ranges compared to base conditions.
The high and low redox loads between the normal cell and the G6PD variants for the comparative study were 2.5 and 0.5 mM/hr, respectively (the maximum applicable load was limited by some of the variants).
This test can also be used to evaluate the performance of the sludge in the presence of inhibitor compounds (McHugh et al. 2004), to observe the changes in sludge activities, to designate the reduction rate of various components (Jaeho and Sung 2011), to assess kinetic parameters for the system under batch conditions, and to estimate maximum applicable loading rate.
It is shown that AASHTO Specifications can still be applicable for load distribution factor, while the effective flange width needs to be re-defined for bridge-system with partial degree of composite action.
Because the TOE constants measured by Prioul et al. (2004) are obtained for loading of the static strain change, we admit that these values are not necessarily applicable to loading of the dynamic strain change.
The criterion is applicable to loading situations where there is an arbitrary phase difference between the axial and torsional loadings.
The context handler gathers initially known attributes from one or more policy information points (PIPs, e.g., a database), which the PDP uses to evaluate the applicable policies loaded from the policy administration point (PAP).
To determine the ultimate non-damaging loads applicable on fasciae, preliminary series of load-download tests were performed on specimens of different groups of animals on the basis of previous study on analogous tissues [ 9].
