A brief summary is given on the basic theory of optics to show how this condition arrives for metamaterials to be designed into an antenna with split-ring-resonator (SRR).
Hence, from the results obtained in Section 5.2 and Figure 11, it can be understood that increasing the number of transmit antennas to split the total rate requirement among the transmitters by implementing spatial multiplexing is more power efficient in terms of overall power consumption at the cell border than at the cell center.
Do not attempt to connect your AIS receiver into an existing VHF radio antenna without splitting.
Because a single, non-split antenna cannot handle transmissions to both a radio and an AIS system, your AIS receiver will blow out when you use the radio.
In this paper, the design and characterization of a tunable patch antenna loaded with complementary split ring resonators (CSRRs) on the patch have been realized.
This paper demonstrates the design of a triple band notched ultrawideband circular microstrip patch antenna loaded with Complementary Split RingResonator (CSRR) and S-shaped slot in microstrip feed line.
According to the visibility between the UE and the antennas, the IRs are split into the LoS group and the NLoS group.
For that, the destination needs to split his antennas (not physically) into two groups, for the reception from the source and the relay.
With the accelerating voltage fixed at 30 kV, nano-sized slot antenna array of double-split ring resonators was successfully milled at the ion beam current 1.5 pA with milling depth setting of 40 nm as can be seen in the SEM image of Fig. 4(b) and (c).
The transmission can be enhanced by cutting the bull's eye antenna; i.e., a split bull's eye structure[25].
The antenna radiating element consists of split ring structure and CSRR for generating multiband characteristics, which is fed by offset microstrip line.
