Your English writing platform
Discover LudwigExact(10)
This resulted in reducing the hydrophobicity (advancing contact angle reduced from 116 to 92°).
The wetting contact angle reduced significantly due to the increase of carbon oxygen sites on the surface.
Besides, the 20 L PEEK showed more hydrophilic feature than native PEEK, and the surface contact angle reduced from 39.7° to 21.7° as layers increased from 5 to 20.
It was observed that, with increase in the M value from 0 to 1.57, the contact angle increased from 30° to 135°, respectively and with further increase in M value, the contact angle reduced and remained nearly constant thereafter.
Side-mode suppression ratio ∼20 dB is obtained for proposed devices from threshold to rollover currents at all measure temperatures, with the peak output power of ∼30 mW at 10 K in pulsed mode and lateral divergence angle reduced by half.
Imaging took place immediately hereafter using the above CSI sequence with the flip angle reduced to 1°.
Similar(50)
The contact angle reduces from 35° to 2° with the tube diameter increasing from 30 to 190 nm.
That is, each pixel is collected close to the painting normal and not from an oblique angle, reducing the amount of 'projection' distortion in the resulting images.
Nevertheless, excessive reduction of sensing angle reduces the chance of direction synchronization among nodes, and thus, it decreases the neighbor discovery ratio.
It clearly demonstrates the significant improvement of wettability when the water contact angle reduces to 65.76° with the deposition of Al2O3 film on PET by ALD, compared to the contact angle of the uncoated substrate (88.26°).
Longer covalent bond with greater angle reduces the energy required to change the configuration of the molecules and Si O molecules are more readily moved compared to C C molecules.
Write better and faster with AI suggestions while staying true to your unique style.
Since I tried Ludwig back in 2017, I have been constantly using it in both editing and translation. Ever since, I suggest it to my translators at ProSciEditing.

Justyna Jupowicz-Kozak
CEO of Professional Science Editing for Scientists @ prosciediting.com