Sentence examples for angle of the plate from inspiring English sources

The relationship among the scanning distance, the beam-cross angle of the LDV system and the rotating angle of the plate is established.

Numerical results include the dependence of the lowest eigenvalue (or stress singularity) on the wedge aperture angle of the plate material.

As test parameters, the traveling speed and the orientation angle of the plate were changed, and the coverage density of the IEO was also varied.

It is found that the heat transfer rate at the two sides of the plate increases with increments in the Rayleigh number and/or the Prandtl number, while decreases with widening the inclination angle of the plate.

Besides, as long as the inclination angle of the plate is set at appropriate range and the feed rate of the mixed particles is moderate, the non-spherical particles can be separated effectively from the spherical particles.

The dependence of the reflected and transmitted coefficients on the design parameters, such as porosity, submergence depth, plate width, gap distance, wave heading, inclined angle of the plate, and wave length, is systematically analyzed.

To decrease the number of fault parameters, we fixed the strike, dip and rake angles of the plate interface to 308°, 20° and 146°, respectively, for the PHS and 192°, 23° and 85°, respectively, for the PAC based on the kinematic model of Nishimura et al. (2007).

The base adjusts the floating height and the inclination angle of the floating plate by controlling the pulling forces of the three electromagnets.

The results demonstrated that optimum inclination angle of the absorber plate for Malaysian condition was 45 degrees.

The inclination angle of the clamp plate can be changed and rotated in order to simulate the inclination angle of the concrete transit mixer drum.

The influences of ply angle of the laminated plate and the control method on the characteristic of flutter and active vibration control are analyzed.