Sentence examples for angle of order from inspiring English sources

While some flexibility in roll angle of order several arcmin can often be accommodated in observation execution, this avoidance is most rigorously accomplished by imposing a roll angle constraint (see below).

The light diffraction is given by [ 18] sin α q = q ⋅ λ D e t Λ = q ⋅ λ D e t ⋅ ν c H 2 0 (11 where α q, λ Det, Λ, c H2O and ν are the diffraction angle of order q = 0, ± 1, ± 2,…., the wavelength of the light source, the acoustic wavelength, the speed of sound in water and the acoustic frequency, respectively.

Solid angle of the order of 100 msr can be employed by using very large optical elements.

The observed large amplitude oscillations also induce an increase in drag and tether angle of the order of 100% The above results suggest that oscillations are highly significant to predictions of sphere response in a steady flow, and should not be neglected.

By using a neutron beam with milliradian divergence it is possible to detect scattering angles of the order of microradians.

In cooperative localization systems, wireless nodes need to exchange accurate position-related information such as time-of-arrival (TOA) and angle-of-arrival (AOA), in order to obtain accurate location information.

The current airfoil design methods are based on one point of design angle of attack, in order to seek the local maximum aerodynamic performance without considering the whole aerodynamic performance within continuous design angle of attack.

The result was performed with a low-grazing angle of incidence in order to obtain the signal from the thin film.

Different skin samples need to be scanned with a fixed as well as predefined angle of incidence in order to generate a distortion map between specific angles α and the orthogonal case.

The injector was at an angle of 12° in order to avoid injuring vessels, its distal end entering a depth 4.5 mm in the fourth ventricle, and was installed and documented in the burr hole for measuring intracranial pressure.

The dried sample was thereafter transferred to a high resolution ion beam coater (Gatan Model 681, Oxford, UK), and ion sputtered with gold at an angle of 45° in order to form a 2 3 nm gold layer on the surface of the resin particles.