Sentence examples for angle of failure from inspiring English sources

β is the angle of failure criterion.

Maximum torque to failure and angle of failure were obtained from the torque force to angular displacement data.

The UCC strengths were calculated based on the angle of failure plane obtained from the failed specimens.

Peak torque to failure (Tmax), angle of failure, gauge length (L), and polar moment of inertia (J) were used to calculate maximum torsional rigidity (TR), shear modulus (SM), and maximum torsional shear stress (SS).

For adjusting the structural parameters of the failure joint and the adjacent joints, the rotation matrix of failure joint is still remained in the kinematic equations, and the current angle of failure joint locked is substituted into kinematic equations.

The objective of this paper is to contribute to find an explanation for the appearance of an angle of failure of about 53°, referenced by several authors, in the case of compression transverse to the fibres.

The angle of the failure planes relative to the principal stress axes was calculated using the standard Coulumb failure criterion (Jaeger and Cook 1979), if shear failure is predicted.

The average angle of effective failure line is calculated as 27°.

Parameter χ determines the inclination angle of the failure macro plane ω to main compression axis and, in its turn, it is determined by the stress state mode C = σ3/σ1.

The angle of effective failure line is calculated about 31° The effective stress paths of clean sand and 10% silt content sample (Fig. 16a) were seen to deviate upwards from phase transformation point increasing the strength which is termed as stable behavior [41].

These innovative modifications in the analytical models included redefining the inclination angle of shear failure surface, redefining the effective depth of the section, considering the influence of the thickness of steel skin, and developing analytical models on tensile resistance of the overlapped headed studs.