Sentence examples for angle of bending from inspiring English sources
The first parameter in relation (5a), on the other hand, indicates that the plane ADCB rotates about the line cc (in the y-direction) and B 6 is the angle of bending γ per unit length.
The expression is quantitatively exact for beams with any angle of bending even when paraxial condition is not satisfied i.e. beam cross-sectional diameter is comparable with the radius of curvature of bending.
The analytical solution of the crushing resistance was derived and the two types of deformation modes were identified using the analysis of the fully plastic bending moment with different orientation angle of bending axis.
A non-linear piezoelectric dual sensor consisting of one-directionally and randomly aligned bi-axially grown zinc oxide nanorods was introduced for simultaneous detection of the bending radius and angle of bending deformation.
Surprisingly, this bending did not lead to the breakdown of the tubular structures unless the angle of bending exceeded 90°, and even then the two sections still remained connected.
Bend this tool to the angle indicated on your frame, and then match the bending angle of your bending tool to this angle.
The results also indicate that the range of bending angles of the Triple-LET flexure hinge made of beryllium bronze is from 0° to 128.2°, which is two times larger than that of the LET flexure hinge.
A simplified relationship between the bending moment and the rotation angle of a bending hinge is introduced.
where C b and k a are force constants representing the bond stretch and bond bending, respectively, and θ a, r b, θ a 0, and r b 0 are the bending angle, the length, the equilibrium angle of the bending angle, and the equilibrium length of the bond.
Among these, 26 were left bends and the other 26 were right bends, as indicated in Table 3, where R is the radius of bend; Δ is the deflection angle of bend; Ve is the speed at curve entry.
The five inputs were angle of bend, punch radius/thickness ratio, die gap, die entry radius, yield strength to Young's modulus ratio and the strain hardening exponent, n.
