The phrase "angle inclined" is not commonly used in written English and may cause confusion.
It could be used in contexts related to geometry or physics when discussing the inclination of an angle in relation to a reference line or plane.
Example: "The angle inclined at 45 degrees creates a perfect diagonal across the square."
Alternatives: "inclined angle" or "angle of inclination".
Laminar natural convection in differentially heated (β = 0°, where β is the inclination angle), inclined (β = 30° and 60°), and bottom-heated (β = 90°) square enclosures filled with a nanofluid is investigated, using a two-phase lattice Boltzmann simulation approach.
Holes of 10 to 12 m long are drilled in fan cut pattern around galleries at regular intervals of 1 to 1.5 m with an angle inclined towards goaf by means of crawler mounted jumbo drill.
The results indicate that for into mesh lubrication, a suitably small angle inclined to driving gear, deviation of injection position from into mesh side, and larger spray distance improve the lubrication effect.
With out of mesh lubrication, a small angle inclined to driven gear, deviation of injection position from out of mesh side, and smaller spray distance provide the optimal lubrication effect.
In particular, we consider the plane strain problem of a rigid cylinder in non-slipping adhesive contact with a transversely isotropic elastic half space with the axis of symmetry oriented at an angle inclined to the surface.
A generalized plane strain JKR model is established for non-slipping adhesive contact between an elastic transversely isotropic cylinder and a dissimilar elastic transversely isotropic half plane, in which a pulling force acts on the cylinder with the pulling direction at an angle inclined to the contact interface.
The samples were put in different angles inclined relatively to the horizontal to open an etching window at the far end of patterns.
To prove this, we have varied the location of the light source (along the plane perpendicular to the distance between the source and specimen) and observed that the maximum photo-voltage occurs when the light source is about 45° angles inclined to the vertical.
The packaged FMM equipment for large dip angle, steeply inclined, and other complex difficult seams are critical for facilitating the safe and efficient automatic mining of these seams.
In the conversion, the vertical resisting force can be adjusted simply by applying and removing torque to the screw jack to change and hold the angle of inclined bars placed in the cranks.
Within the town the narrow, sharply angled, steeply inclined streets run through banks of white-walled houses whose Arabic origins are evident everywhere.
