Sentence examples for and the speed increases from inspiring English sources

As the current is reduced, the torque is reduced and the speed increases.

If sound travels 331 meters per second in zero degrees Celsius, and the speed increases 0.6 meters as the temperature increases by one degree, what is the distance between a person and lightning if the person hears the bolt 5 seconds after he sees the lightening in 5 degrees Celsius?

(To do this, turn a round dial to the left and a red, indexed digital meter shows the speed decrease; turn the dial right and the speed increases).

The sound signals indicate the moment when the patient must round the cone, and the speed increases at a rate of 0.6 km/h per minute.

The changes in speed and amplitude of cycles are directly measured in Figure 1D-E, and show that as α X increases the amplitude gradually decreases to zero and the speed increases until the cycles disappear.

On the West Side Highway and then the Saw Mill River Parkway, the supercharged growl of the 2-liter 4-cylinder engine rose an octave as the revs climbed and the speed increased.

But suddenly the endeavor became frenzied, as if a wildebeest in the back had screamed, "Lion!" The herd shifted gears and the speed increased; individuals fanned out to the sides and began leaping into the water, hurtling their body several feet into the air with the power of an Olympic diver, sometimes landing on the backs of others in a gnarled mess.

As the amplitude and the speed increase, the force during the elongation also increases, as expected (Fig. 2, bottom row).

The valuable information is that the lateral and vertical acceleration increases as the speed increases, and the maximum values are 0.15 and 0.62 m/s2, respectively.

The maximum amplitude in the lateral and vertical direction increases as the driving speed increases, and the maximum vertical deflection is 0.69 mm, while the maximum lateral amplitude is 0.046 mm, at the speed of 80 km/h; the lateral and vertical acceleration increases as the speed increases, and the maximum values are 0.15 and 0.62 m/s2, respectively.

Finally, (7) predicts that the delay decreases as the node speed increases, and this is consistent with Figure3d which shows that, as the speed increases, the delivery rate increases, because more nodes arrive at their destinations before the TTL expires.