Sentence examples for and the respective values from inspiring English sources
The concentration of DE in barley, corn, and wheat were 3197, 3376, and 3503 kcal/kg (as-fed basis), respectively, and the respective values of ME were 3035, 3304, and 3407 kcal/kg (as-fed basis).
Changes from baseline HbA1c with saxagliptin 2.5 and 5 mg plus glyburide vs uptitrated glyburide were −0.54% and −0.64%, vs 0.08%, respectively (P < 0.0001 for both combinations vs uptitrated glyburide); and the respective values for FPG were −0.39 mmol/L, −0.56 mmol/L, vs 0.06 mmol/L (P = 0.0218 for 2.5 mg and P = 0.002 for 5 mg saxagliptin plus glyburide vs uptitrated glyburide).
Here, ω2 is greater than ω1 and the respective values represent the end and start of the period.
Then, by Theorem 3.4, there exists λ̄ such that ((bar{z},bar{lambda})) is an optimal solution of (operatorname{WDMPEC} (0,0 )) and the respective values are equal.
The results of 67 impedance diagrams of stainless steel in a 3.5% NaCl medium at 25 °C obtained in steps of 10 mV, and the respective values of the fitted parameters of the equivalent circuit are reported.
By comparing the simulation results and the respective values of the proposed figure, it is evident that this figure of merit provides values that are proportional to the conversion efficiencies of solar cells.
The interim test statistic is calculated as Z 1 = d ¯ + 2 s d 1 − λ 3 / n 1 s d 2, where λ = 20% is the 20% limit, and Z1, d1, and n1are the respective values after enrolling the first 20 patients.
To assign the remaining types of movements to the trajectories we fitted equations 1 3 to the MSDs and calculated the respective values of R2 for each fit (R2, correlation coefficient, indicating the strength and direction of a linear relationship between two random variables).
For ampicillin non-susceptible strains (104 strains) cefditoren MIC50/MIC90 values were 0.25/1 mg/L, whereas for amoxicillin-clavulanate and ciprofloxacin non-susceptible strains (21 and 16 strains respectively) the respective values were 0.5/128 mg/L.
We followed the general recommendation to use group-specific instead of general fractionation values for the configuration of mixing models (McCutchan et al., 2003; Vanderklift and Ponsard, 2003) and have listed the respective values and the assumed uncertainty of these values in the supplementary information (Section S2).
For elliptic rotor, the obtained optimal values of geometrical parameters are 0.884, 1.5 and 0.744, respectively, for aspect ratio, microchannel height, and eccentricity, while the respective values for rectangular rotor are 1, 1.5 and 0.694.
