The phrase "and the maximum force" is correct and usable in written English.
It can be used in contexts discussing physics, engineering, or any situation where forces are being measured or compared.
Example: "The structure must withstand the applied load, and the maximum force should not exceed the specified limit."
Alternatives: "and the peak force" or "as well as the greatest force".
The maximum moving velocity of 1.05 mm/s and the maximum force of 4.3 N were observed.
DP2 is an output Grapher; one can determine the maximum force required by the jack and the maximum force acting on the new structure.
The maximum force acting along the positive heave direction is 6.9 kN and the maximum force along the negative direction is 5.5 kN.
It imposes a nonlinear influence on the UME and the maximum force on the receiver, as shown in Figure 9 for the vertical alignment of five-buckyball system.
The flexural Young's moduli were the slope of the section on the curve indicated by a red line and the maximum force values are circled in red.
The criterion of convergence of energy is chosen as 10−5 eV between two ionic steps, and the maximum force allowed on each atom is 0.01 eV/Å.
The multiobjective particle swarm optimization (MOPSO) algorithm is then adopted to seek optimal gradients of wall thickness and foam density, aiming to simultaneously improve the specific energy absorption (SEA) and reduce the maximum force (Fmax).
In the case under examination, the inertia force is much greater than the drag force, and hence the maximum force proves to be very close to the force at the instant of the maximum acceleration.
Maximum load is a widely used parameter for mechanical evaluation, and represents the maximum force that a material can sustain before failure.
Also, inconsistent with the thesis that NO attenuates muscle function, we found that force frequency curves were unaffected by the loss of nNOSμ and the maximum force-generating properties of female muscle were unaffected by the loss of nNOS.
While circles could completely characterize the location and intensity of the maximum force associated with a specific impairment, the path to be covered is quite long.
