The phrase "and the corresponding device" is correct and usable in written English.
It can be used when referring to a device that is related to or matches a previously mentioned item or concept.
Example: "The software update is now available for the application and the corresponding device."
Alternatives: "and the related device" or "and the matching device".
The effective cathode work-functions and the corresponding device performances of polymer solar cells are systematically changed as a result of inserting the TiOx modification layers.
In more detail, the location information includes the unique device ID and the corresponding device category (e.g., WSN, UHF RFID, or HF RFID).
The formation of functional thin film and the corresponding device performance need further evaluations before concluding them as feasible approaches for energy applications.
The J-V characteristics of the solar cell devices with different ZnO nanocrystals under simulated sunlight were shown in Fig. 4, and the corresponding device performance is summarized in Table 1.
A potential of −0.7 V was also used to optimize the deposition time in the range of 150 to 210 s. Figure 3 shows SEM images of samples obtained at various deposition times and the corresponding device performance.
In order to understand the reasons behind the improvement of device performance, we carried out SEM, UV-vis absorption, steady-state photoluminescence spectra, and impedance spectroscopy measurements on the perovskite layers and the corresponding devices.
We found a linear relationship between the sheet resistance of the ITO layer and the series resistance of the corresponding device, which strongly influences the fill factor.
The bottom diagrams are the corresponding device structures and endurance pulse conditions Fig. 3 The comparison of FTIR spectra of HfO2 thin films between initial and after nitridation treatment.
From the J V curve of the corresponding device under illumination, FF and η were calculated to be ~62.3 and ~9.24%, respectively.
The photovoltaic metrics of the corresponding device are as follows: short-circuit current density (JSC) is 24.0 mA cm−2, open circuit voltage (VOC) is 1.15 V, and fill factor (FF) is 0.75.
