The phrase "and reduce the deviation" is correct and usable in written English.
It can be used in contexts where you are discussing the need to minimize differences or variations from a standard or expected outcome.
Example: "To improve the accuracy of our results, we need to analyze the data carefully and reduce the deviation from the expected values."
Alternatives: "and minimize the variance" or "and lessen the discrepancy".
The primary role of BESS in a PV-BESS power plant is to optimize the output of PV power generation system and reduce the deviation between the actual and forecasted PV output.
The analysis suggests that the tyre pressure of 35psi with the spring stiffness of 26,000 N/m and damper of damping coefficient 418 N-s/m, maximize the SN ratio and reduce the deviation in RC due to mass, hence resulting into a robust design.
In order to deal with this, the CNS increased the stiffness of the limb to resist the environment instability and reduce the deviation of the position.
Increasing the number of points from 3 to 11 improved measurement accuracy significantly and reduced the deviation in measurements from 14%to4%4% [ 18].
Eliminating these factors would reduce the deviation between actual and notional densities, leading to a corresponding closure of less competitive production chain segments and a rise in import substitution.
Thus, a robust adaptive neural network control is added to the feedback linearization control to reduce the deviation.
Future selection decisions should reduce the deviation of long-term contributions of the ancestors from their optimal contributions.
When applying axial force, it was possible to reduce the deviation further of 0.6%, with a specific calibration protocol.
Including population information as a priori knowledge during the fitting process helped to considerably improve prediction accuracy and reduce the corresponding standard deviations when averaged over all organs and all patients (Table 3).
Static droop control alone can increase the frequency nadir and reduce the steady-state frequency deviation.
Finally, simulations based on a two-area interconnected power system show that the proposed approaches can significantly suppress frequency deviation and reduce the active power output of traditional generation units.
