The photodetectors are embedded in a conventional three transistor active pixel topology and measured using a customized low-cost measurement setup.
To understand the transport characteristics of InSb nanowires, a single InSb nanowire was connected with Pt electrodes to fabricate a nanodevice and measured using a high-power electrical measurement system (Keithley 237), as illustrated in Figure 4a.
For LPS-binding protein (LBP) measurement, plasma was diluted 1 800 and measured using a commercially available plate-based ELISA assay according to the manufacturer's specifications (Cell Sciences, Canton, MA).
Individual paws were scored and measured using a standard electric caliper, and the measurements were averaged to produce the graphed results.
A sustainability journey must be rooted in the basic business model, and measured using a core set of established financial modelling techniques and industry tools.
The temperature was set from 450°C to 600°C and measured using a thermocouple.
Selected tissues and organs were collected, weighed and measured using a γ-counter.
The excitation signals and the measured voltages are generated and measured using a LabView based system.
The pH was adjusted by 0.1 M NaOH or 0.1 M HCl and measured using a pH meter.
Expired gases were continuously collected and measured using a metabolic cart, and biomechanical measures were assessed using high-speed video analysis.
COD was determined by the dichromate closed reflux method and measured using a spectrophotometer (the Shimadzu UV-1601, Shimadzu Coorporation, Japan) at 444 nm.
