Sentence examples for and maximum quantities of from inspiring English sources
As metalorganic vapor-phase epitaxy (MOVPE) is becoming well-established production technology, there are equally growing concerns associated with its bearing on personnel and community safety, environmental impact and maximum quantities of hazardous materials permissible in the device fabrication operations.
It has been previously reported that a CSF of 1.75 yielded the maximum quantities of xylose and glucose upon pretreatment and enzymatic saccharification, respectively.
Table 3 Maximum quantities of irradiance and insolation for different cases Hourly (W/m2) Daily (kWh/m2/day) Monthly (kWh/m2/day) DNI 995 10.189 5.95 GHI 1065 8.048 6.687.
Currently the guidelines in the commission's drug quantity table can result in first-time offenders facing sentences of 19 to 24 years, with no parole, for possession of the maximum quantities of heroin, crack or methamphetamine.
Constraints are included to express farm level minimum or maximum quantities of input use or output marketing restrictions.
The Puckorius scaling index (PSI) is used to account the buffering capacity and the maximum quantity of precipitation that can form in bringing water to equilibrium (Davil et al. 2009).
The main advantages of the joint scheme are minimizing equipment for gathering system, and getting the maximum quantity of steam per unit of produced mixture.
High performance liquid chromatography profile of J. dolomiaea crude methanol extract (JDME) and fractions JDEE and JDBE is summarized in Table 2. JDME analysis illustrated two known compounds: caffeic acid and apigenin with maximum quantity of caffeic acid (1.9 μg/mg dry sample).
Recently, Sakka et al. [5] retrospectively analyzed 373 intensive care unit (ICU) patients and found that the maximum quantity of lung water measured was a predictive factor for outcome.
Recently, Sakka et al. [ 5] retrospectively analyzed 373 intensive care unit (ICU) patients and found that the maximum quantity of lung water measured was a predictive factor for outcome.
frac{{C_{text{e}} }}{{q_{text{e}} }}, =,frac{1}{{q_{text{m}} b}}, +,frac{{C_{text{e}} }}{{q_{text{m}}^ (3)where b is adsorption equilibrium constant (L mg−1) related to the apparent energy of adsorption and q m is the maximum quantity of adsorbate required to form a single monolayer on unit mass of adsorbent (mg g−1).
