Sentence examples for and interlocking of the from inspiring English sources

All the liz/ctl gouges show grain size reduction by cataclasis, possibly resulting in strain hardening with the compaction and interlocking of the grains (e.g., Morrow et al. 1982).

Mobility and interlocking of the chains are important factors affecting the formation of this particular structure in the dispersed phase, they must be considered together to satisfy the demand for comprehensive positive synergistic effect on tensile properties.

The strong bonding formed at the sleeve stirring zone and thermo-mechanically affected zone, resulting from the macromolecular interdiffusion and interlocking of the smashed carbon fiber at the bonding interface by thermo-mechanical behavior.

The cooperative slide-and-interlock behavior of the VS domains described by the VS-gate coupling relation leads to the experimentally observed bistable gating.

The success of dental implants has become more and more predictable since Brånemark first observed what he later called osseointegration, in 1960 [1], meaning the direct structural and functional interlocking of the natural bone and titanium implant surfaces.

In contrast the combination of a jet of HA and abrasive powders resulted in an increase in surface abrasion and increased interlocking of the HA into the metal surface was observed.

The complex coordination of 3-level asynchronous, non-intrusive, multi-vehicle-mixed operations of the mobile block, fixed block, and the interlocking of the station was constructed (Fig. 2).

The host site and allograft require meticulous preparation to maximize surface contact and mechanical interlock of the allograft and host.

After a sufficient accumulation of the corrosion products, a loss of direct contact between the metals occurs and this compromises the interlocking of the joint.

The system exhibited a ductile failure mode which can be attributed to the high specific surface area and the desired mechanical interlocking of the chicken mesh reinforcement.

Also, the immersion in hot water had a role in the post curing of epoxy resins and increased the mechanical interlocking of the network system, resulting in increasing the adhesion strengths of the epoxy coating system.