The phrase "and in the suction" is grammatically correct and can be used in written English.
It can be used in contexts related to mechanics, engineering, or medical procedures where suction is involved.
Example: "The device operates effectively by creating a vacuum and in the suction process, it removes debris from the surface."
Alternatives: "during the suction" or "within the suction process".
Subjective measures included counting of soaked swabs, estimation of blood clots and blood in the suction bottle whereas objective assessment was made via serial measurement of the reduction in hemoglobin level or evaluation of the need for blood transfusions [ 2].
The data from the current study demonstrated that for patient-used flexible endoscopes the residuals for protein, hemoglobin and bioburden in the suction channel (L1) after the ECR cleaning are substantially better (99.7% met all benchmarks) compared to optimal manual cleaning.
In addition, measured values of the average torque, mechanical power, volumetric flow rate and transient pressure variations in the suction and compression chambers are shown to be in good agreement with theoretical predictions.
Models for the refrigerant flow in the suction and discharge processes, radial and flank leakage, and heat transfer between the gas and scroll wraps were combined with the conservation equations.
The blade passage frequency component on point S2 is much more notable than the one on point S1, which may reflect the effect of the interaction between the impeller and the inlet tongue in the suction chamber.
The inner circulation means that two independent piezoelectric pumps are driven asynchronously, and therefore, one pump is in the suction period (the pump volume becomes larger) and the other is in the discharge period (the pump volume becomes smaller).
One of the group tumbled into a puddle and lost her rubber boot in the suction of calf-high muck.
The flow mechanisms of the vortexes existing in the suction and expansion chambers were revealed.
The pump should be sited as low as possible in relation to the liquid level in the suction system and in a place permitting the shortest possible suction pipe with the minimum number of bends.
