The phrase "and in the full scale" is not correct and may be unclear in written English.
It could be used in contexts discussing measurements, assessments, or evaluations that encompass all aspects or dimensions of a subject.
Example: "The project was evaluated and in the full scale, it demonstrated significant improvements over the previous version."
Alternatives: "in its entirety" or "on a comprehensive level".
When developing a new process, to achieve successful scale-up, the operating regime which yields ideal performance in smaller scale experiments should be identified and retained in the full scale realization.
The electrical conductivity of the aqueous solutions and the phosphate 0.1 M, KNO3 0.1 M and pH 7.4 solutions of Casiopeína III-ia was determined using an Oakton CON 110 conductometer (Oakton Instruments, Vernon Hills, U. S. A). at 25 ± 0.1 °C which has an accuracy of ±1 % in the full scale and the alternating current supplied to the bridge has a frequency of 2 kHz.
Both the positive scores and negative scores range from 17to8585 in the full scale (Lambrinou et al. 2005).
In case of fatigue tests of stud joints, where damage was located into the bonded area inside the specimen, temperature changes were considerably more sensitive than displacement and detailed temperature monitoring indicated weak areas in the full scale model specimens.
Significant CODs generation was obtained during the warmer season (T > 10°C) in the full scale storage and almost no generation at lower temperatures (4 6°C).
Chemical elements in raw wastewater and granules from the full scale SBR were analyzed by XRF.
With no funding and without a proper Health Management Information Systems in place, the full scale national P4P scheme faced a number of challenges.
Most jurisdictions will have the option to bring the diversion and intervention programs already in place to the full scale as well as adopt other proven models of service (cf. Druss & Mauer 2010).
Several instrumental approaches were employed (i.e. XRF, SEM, XRD, and ICP-AES) to identify the bed materials (fresh sand and degrader sand) and clinkers formed in the full-scale incinerator tests.
In this study, a material flow analysis model was developed to estimate the HCl and SO2 concentrations in the MSWI flue gases (FGs), and their concentrations in the full-scale MSWI were monitored.
