Sentence examples for and a low strength from inspiring English sources

To replicate the physical characteristics of historic masonry materials, vintage solid clay bricks and a low strength hydraulic cement mortar were used for construction of the test walls.

In the second series of testing, the results of in situ testing were further confirmed by performing laboratory based reverse cyclic out-of-plane testing of two slender URM walls that were constructed using vintage solid clay bricks and a low strength hydraulic mortar, replicating typical historic URM construction.

However, some adhesive joints presented adverse behavior in different temperatures, become brittle at low temperatures and have a low strength at high temperatures, thus limiting the use of adhesive bonding in many applications.

Results of strength of evidence grading are found in Table 4. Four prescriber or patient characteristic associations with warfarin use were found to have a "high", 20 a "moderate", and 3 a "low" strength of evidence rating.

It was found that as the heat treatment temperature (HTT) increases to 1900 °C, the strength and toughness of a low strength specimen (LSS, thin PyC ≈40 nm) increase by as much as 43.2% and 274.0%, while those of a high strength specimen (HSS, thick PyC ≈140 nm) show decreases of 25.1% and 14.8%, respectively.

The matrix material of an advanced polymer composite is a low strength and low modulus component and the fiber are of high strength and high modulus component.

The fibers of woven bones are randomly aligned and as the result have a low strength.

Most beginner set-ups will come with a mouthpiece/ligature, a cleaning swab, cork grease, case, and (if you're lucky) a low strength reed.

Firstly, the rock is phyllite, which is very soft with a low strength.

The in-plane tensile modulus of the polyimide exhibited a 35% increase when 0.16 vol.% Ni-graphene was added to the polyimide and cast in a low-strength magnetic field.

The water-to-cement ratio of 0.6 was used to produce a cement slurry with a large thickening time, high porosity, and permeability and a low compressive strength.