Sentence examples for analytical simulation in from inspiring English sources

Analytical simulation in ANSYS and experiment are carried out to investigate the resonance frequency and vibration mode shape as well as amplitude.

The experimental tests have highlighted a viscous-plastic behavior, which finds a good correspondence in the analytical simulation adopted for the phenomenological reproduction of creep response.

Complete analytical simulation of the circuit results in center frequency of 5.5 GHz, with 1.9 dB NF, 50 Ω input impedance, 1 GHz 3 dB power bandwidth, 20.5 dB power gain (S21), high reverse isolation (S12)<−48 dB, −18.5 dB input matching (S11) and −21.3 dB output matching (S22), while dissipating as low power as 2 mW at 1.8 V power supply.

The paper presents in detail the schemes' design, operation mechanism, and the performance evaluation (through analytical and simulation in ns-2).

Computation modeling and analytical simulations were performed in order to assess the scalability of the technology to the larger sizes that are required to implement the first generation of missions using solar sails.

Plane wave theory analytical simulations have proven useful in predicting the noise transmission properties of such systems.

In addition, analytical simulations with Burgers model were carried out, and its predictive performance was considered insufficient at early ages, particularly upon unloading.

The results were compared based on analytical method and simulation in COMSOL Multiphysics.

In the present study, NAG subroutine (D02EJF) in MATLAB (with analytical Jacobian) for simulation in combination with Quasi-Newton (QN) method for optimization is used to verify the contradictory results reported using gear package of old NAG subroutine (D02EBF), which is now replaced with D02EJF, in combination with simple GA in earlier literature.

In Figure 4, a comparison between analytical and simulation results in a scenario with IEEE 802.15.4 MAC protocol and ideal communication links (i.e., no noisy communication links) and two possible clustering configurations, uniform (16-16-16-16) and nonunisorm (40-8-8-8), is proposed.

Figure 5 Throughput/Load versus number of Wireless Stations: Analytical and simulation results in AWPP. Figure 6 Delay versus number of Wireless Stations: Analytical and simulation results in AWPP.