Sentence examples for analysis of the laminate from inspiring English sources

Combining the model of a soft-body impactor with an appropriate contact algorithm, we could capture the transition from the global bending mode at low velocity to the local deformation mode at high velocity, enabling a discussion of the ballistic limit using the damage analysis of the laminate.

The predictive methodology, which was based on a fracture mechanics approach, utilised the mixed mode fatigue delamination behaviour of the materials and finite element analysis of the laminates for evaluation of the strain energy release rate.

The buckling analysis of the skew laminate plates of variable thickness are carried out by the bifurcation buckling implemented in finite element program ANSYS.

First, we conduct homogenization analysis of the heterogeneous laminate and regard it as being composed of the homogenized anisotropic layers (i.e., the microscopic analysis).

Computational time required for determining the interlaminar stresses using Q-2D model is approximately 30 times lower than the 3D analysis of the same laminate.

The purpose of the paper is to develop a synthesis of damping analysis of laminate materials, laminates with interleaved viscoelastic layers and sandwich materials.

In this paper, the NURBS-based isogeometric analysis is developed for the free vibration analysis of the generally laminated Timoshenko-type of deep curved beams with arbitrary curvature.

Following this work, Matzenmiller et al. (1995) developed a damage model called 'MLT model' for the non-linear analysis of the composite laminates.

To the best of the authors' knowledge, there is no published research in the literature conducted on the static and free vibration analysis of the stiffened laminated composite doubly curved shells by analytical approach.

A simple off-axis fatigue analysis of the cross-ply laminate is then attempted on a ply basis, in which no effects of progressive damage are assumed.

Progressive failure analysis of the sample composite laminated hoops with an open-hole of different diameters subjected to radial loading are performed to study the effect of geometric non-linearity on the failure initiation and propagation.