The phrase "analysis of the coating" is correct and usable in written English.
It can be used in contexts where you are discussing the examination or evaluation of a coating, such as in materials science, engineering, or quality control.
Example: "The analysis of the coating revealed several defects that needed to be addressed before proceeding with production."
Alternatives: "examination of the coating" or "evaluation of the coating".
A detailed analysis of the coating showed that, the loss of coatings resistant to high temperature is due to oxidation, corrosion, erosion and inters diffusion of coating-substrate, which results in diffusion of alloy elements into the coating.
Growth mechanism of the coatings obtained with varied HNO3 concentration has been systematically studied based on careful analysis of the coating thickness, microstructure and composition.
Microstructural analysis of the coating was carried out using optical, SEM and XRD techniques.
TEM investigations of cross-section thin foils allowed for detailed analysis of the coating microstructure.
EDAX analysis of the coating microstructure confirmed that the coating composition is similar to the feedstock powder.
Field Emission Scanning Electron Microscopy (FESEM) analysis of the coating revealed an irregular porous structure with cracked morphology.
For example, it can be inferred from structural analysis of the coat protein sequence that the fold is very similar to that of PRD1.
This distinction is reflected by phylogenetic analysis of the coat protein sequences from carlaviruses (Fig. 1B).
Analysis of the coat protein coding sequence at both the nucleic acid level and the amino acid level indicates that AHLV is only remotely related to the other carlaviruses known to infect common hop.
Analysis of the roll coating suggested that the initial roll coating composition and microstructure were influenced by the work roll and work piece material composition.
Based on the available literature, SEM images of the blended precursor powder mixture and coating layer, electron probe micro analysis (EPMA) and corresponding XRD analysis of the produced coating, the formation mechanism of the present TiC-TiB2 composite coating during TIG cladding process was elucidated.
