Sentence examples for analysis of test systems from inspiring English sources

The equivalent model is applied to the probabilistic power flow calculation and the stability analysis of test systems.

This paper describes a method for simulating stable random variables in the generation of test systems for economic analysis in power systems.

Using both experimental and numerical analysis of the test system consisting of specimen, gripper and load sensor, it is found that upper-and-lower yield points can trigger the system ringing under impact loading.

Analysis of the test system has suggested that while the stresses experienced by the solder joints increases only marginally with increasing frequency, the fatigue strength of the solder joint decreases drastically with increasing frequency – due to reduction in the fracture toughness of solder joints with increasing strain rate – giving rise to a net reduction in fatigue life of the solder joint.

The model was applied in the probabilistic power flow calculation and stability analysis of the test system.

The wind tunnel test technique developed for the aerodynamic coefficient measurement includes the design of oblique sectional models, the development of a test rig and a measurement system, and the analysis of test results.

Test requirements, selection of critical test parameters, analysis of test results, and determination of remedial action in the event of discrepancies are all systems engineering functions.

The small signal analysis (SSA) of the test system was studied based on the probabilistic equivalent model.

Our analysis also illustrates that the price of the test systems is not decisive.

In the analysis, the limitations of the test system due to the initial hardware setup are discussed.

Our analysis shows that effects of the test system on response time are significant, particularly at lower concentrations and for less volatile compounds.