The phrase "analyses of the test" is correct and usable in written English.
It can be used when discussing the examination or evaluation of a test's results or data.
Example: "The analyses of the test revealed significant trends in student performance over the semester."
Alternatives: "evaluations of the test" or "assessments of the test".
Statistical analyses of the test measurements provide insights into the temperature field in the compartments.
From analyses of the test results, a methodology for the design and construction of an adequate CY block is proposed.
Multiple independent analyses of the test showed that the missile flew at a high-altitude trajectory, soaring to about 1,700 miles before landing in the Pacific off the Japanese coast, about 580 miles from its launch point.
Scientific analyses of the test determined that the new bomb's explosive yield approached 30 kilotons, two times the force of the "Little Boy" bomb dropped on Hiroshima, Japan, in 1945.
Prediction models for dry density, compressive strength, stress strain relationship, and thermal conductivity of aerated concrete were formulated from the regression analyses of the test data.
Based on analyses of the test results, a new model for the stress strain relationship of FRP-confined columns under eccentric loading is developed.
Finite element analyses of the tested studs were undertaken using the measured post-fire mechanical properties of cold-formed steels.
Surface analyses of the tested surfaces show that the thickness and coverage of the thin organic coating play an important role in controlling friction and wear.
After the experimental study, finite element analyses of the tested beams are also conducted by using commonly used finite element software to observe the stress distribution under the impact loading.
Along with summarizing the design and construction details and the experimental procedure, experimentally obtained displacements and stresses, natural frequencies, mode shapes and damping ratios are presented and compared against those obtained from FE analyses of the tested structures.
Most of the antimicrobial studies were combined with chemical analyses of the tested samples and similar activities were observed for samples with entirely different chemical characteristics.
