The phrase "analyses of the cross section" is correct and usable in written English.
It can be used in contexts related to research, scientific studies, or technical reports where the examination of a specific cross section is being discussed.
Example: "The analyses of the cross section revealed significant differences in material properties across the samples."
Alternatives: "examinations of the cross section" or "studies of the cross section".
Figure 5 SEM-EDX analyses on the cross section paint layer of T3 sample.
Okazaki and Nakamura (2006) conducted SEM, electron probe microanalysis (EPMA), and secondary ion mass spectrometry (SIMS) analyses on the cross sections of individual Antarctic MMs in addition to observations of their appearances and bulk chemistry measurements by SEM/EDS prior to the noble-gas analysis.
In Fig. 2, the results of the EFTEM analyses on the cross-section planes of the TiD y /Pd film taken before (left column) and after (right column) annealing-induced deuterium evolution are presented.
Further EDS analyses of three spots on the cross section of the bead show the presence of soda glass in addition to calcium-potash glass.
Careful image analyses of the cross-section of the indented area show that the ceramic top coat undergoes a complex damage evolution during indentation that is altered by thermal treatment.
SEM and EDX analyses of the cross-section area of the Ni Al coating confirm that all three thicknesses consist of Ni, Al and O elements with a non-uniform chemical distribution.
They also include the results of SEM-EDX analyses of the cross-sections performed at the DSM Laboratories (Geleen, Netherlands) at the time.
Elemental chemical analyses of the cross-sections were obtained using a HITACHI S-4800 SEM instrument equipped with a Link ISIS energy dispersive X-ray (EDX) analyser at an accelerating voltage of 20 kV.
Elemental chemical analyses of the layers of the cross section of each sample were obtained by using a Philips XL 30 ESEM scanning electron microscope.
FTIR-RM analyses were performed on the cross sections of Calc1, Calc2, Calc7, Calc8 and Calc10 using a Nic-Plan IR microscope interfaced with a Nicolet Magna-IR 550 FTIR spectrophotometer (Nicolet Instrumentations Inc., Madison, WI, USA) operated in reflectance mode, as previously described [ 14].
In this paper, the behavior of composite columns is characterized at the cross section and member levels through comparisons between inelastic and elastic analyses.
