The phrase "analog board" is correct and usable in written English.
It can be used in contexts related to electronics or technology, specifically referring to a circuit board that processes analog signals.
Example: "The engineer designed a new analog board to improve the performance of the audio equipment."
Alternatives: "analog circuit board" or "analog circuitry".
Both the signal pulse and the BL DC level are sent via a single twisted pair to the Analog Board (AB).
Or keep the kids away from screens with analog board games tailored to the digital generation.
If the output voltage exceeds the acceptable range ({pm } 10 V of the analog board, the gain is switched to the lower one.
The response of the analog board was measured by QuakeFinder using a HP3562A Signal Analyzer, and incorporated into the spectra shown in Fig. 4.
This value determines the upper limit of the measured magnetic moment as (1.6{, times, 10^{-3}}, hbox {Am}{^2}), considering the input limit of the analog board ({pm } 10 V.
A conductance injection amplifier (SM-1) or software running on a DSP analog board (SM-2; Cambridge Conductance, Cambridge, UK) implemented multiplication of the conductance command signal and the real-time value of the driving force, with a response time of <200ns (SM-1) or <25 µs (SM-2), to produce the current command signal.
Driver softwares that enable LabVIEW to communicate with the digital or analog boards are available from the respective manufacturer.
The desired voltage determined by computation of the sensor data is applied to each actuator through a digital-to-analog board [Contec DA16-16 LPCI L] and an amplifier (MATSUSADA, HJPZ-0.15Px3).
The low-level control unit includes PC1 (cf. Fig. 5; AMD ATHLON XP 2.8 GHz, 512 MB RAM), equipped with two National Instruments input/output boards: a 12-bit high-speed analog output board (model: PCI-6713E), and a high-performance data acquisition board (model: DAQ PCI-6071E).
The output signals of sensor are gathered by the analog acquisition board, and the digital processing board implements analog-to-digital conversion.
Woradorn is responsible for the soldering of the analog circuit board.
