The combined effect of all of these is the ultimate increase of the photocatalytic activity of the ZnO/TiO2 composite.
Early detection of treatment response might change therapeutic strategies in the case of non-responders, whereby unnecessary toxicity and negative side effects might be avoided and individualized treatment would be possible with an ultimate goal of increasing long-term survival and saving money by avoiding ineffective treatment.
Becklake index is the number of volume turnovers required to wash 90% of the ultimate total increase of oxygen content in the lung, divided by 0.9 (see Figure 1c).
It also shows an increase of ultimate strain accompanying the increase of fiber volume fraction, V f.
Based on accelerated characterization methodology – Time-Stress Superposition Principle (TSSP) coupled with Findley's law, for a reference stress of 20% of the material ultimate stress, an elastic deformation increase of 30% is obtained after 50,000 h.
CFPP specimens show no decrease in mechanical properties over repeated loops, the final specimens show an increase of 26%and43%3% in ultimate tensile strength and ultimate strain, respectively.
Anchorage for the U-wraps prevents premature debonding of the FRP wraps, resulting in a greater increase of the ultimate flexural capacity. 3.
Specimens of group B demonstrate a slight increase of the ultimate shear capacity than those of group A despite that the web reinforcement is less effective as pointed out by comparing the results of each group with its associated reference specimen.
The findings indicate that a combined effect of an increase of 0.0124 wt.% oxygen and a decrease in α-lath width due to differential cooling at different heights within the component resulted in an increase of ultimate and yield strengths without a significant loss of ductility.
With the increase in column thickness from 1.8 to 2.0 mm for a constant beam depth of 87.5 mm, there is a marginal increase of 7%% in the ultimate moment capacity and 19.4 % decrease in the joint stiffness.
With the increase in column thickness from 1.8 to 2.0 mm for a constant beam depth of 75 mm there is a marginal increase of 11%% in the ultimate moment capacity.
