The phrase "an optimum case" is correct and usable in written English.
It can be used when discussing the best possible scenario or situation in a given context.
Example: "In an optimum case, we would complete the project ahead of schedule and under budget."
Alternatives: "an ideal scenario" or "a best-case situation".
This improved detection limit was confirmed for another UR design and for a second target sequence, human metapneumovirus, with 7 11 copies/10 μl reaction detected in an optimum case.
Considering numerous production scenarios, we have attempted to make a balance over such parameters as production rate, post-production ultimate reservoir pressure, the cumulative amount of condensates produced, number of wells and number of days required for reservoir depletion using compositional simulator of ECLIPSE software package, so that an optimum case can be achieved.
With a careful design of electric field profiles on both sides, one can obtain the optimum case of a spiral SDD with a straight (flat) drift channel and constant drift field throughout the carrier drift channel.
For the optimum case of a bi-metal layer considered previously, we have plotted in Fig. 4b the spectral response for several values of the index of refraction.
In the optimum case of a non-ideal CRC scheme with five stages, the LPG mixture can be separated on polyimide into an olefinic and a paraffinic stream of high purity (99 99.9 mol%) with ultrahigh yield (98 100%).
Numerical simulation of the quasi-static axial crushing of the new device shows that a smooth and high reaction force curve can be achieved in comparison with those of conventional square tubes, with an increase of 29.2% in specific energy absorption and a reduction of 56.5% in initial peak force being obtained in the optimum case.
In this case, their average SCR improvements only differ by dB for the optimum case.
In the optimum case, increasing oil price will influence to decrease CO2 emission.
Finally, for the optimum case, the amount of energy capture and the energy saving cost are obtained.
A multi-objective procedure proved that the absorber with three fins in the lower part is the optimum case with 0.51% thermal efficiency enhancement.
Furthermore, we simulate the optical absorption of such conformal structures by varying their structural periodicity to determine the optimum case that gives rise to maximum solar absorption.
