The phrase "an open loop configuration" is correct and usable in written English.
It can be used in contexts related to systems, engineering, or control theory where a process or system operates without feedback.
Example: "In an open loop configuration, the system does not adjust its output based on the feedback from its performance."
Alternatives: "a non-feedback system" or "an open-loop system".
Because the surgeon works with a visual feedback, the articulated joint is controlled in an open-loop configuration.
We explore the phenomenology of an open-loop configuration in which CA cells do not sense the presence of the object being moved.
The simulated results of an open-loop configuration and two closed-loop control strategies illustrate the usefulness of this knowledge-based approach as a means of estimating the risk of foaming in anaerobic digestion.
One of the effective modifications reported was to (1) replace its closed-loop configuration with an open-loop configuration and (2) utilize the extract port for collecting both the intermediate-affinity and the highest-affinity components in regular sequence in every switching period.
This limits the dynamic range of the sensors to roughly a few hundred nanoteslas, when operated without feedback in an open-loop configuration, as done in these experiments.
Once calibrated these devices have a high fidelity, so it is possible to use them in open loop configuration [ 29].
The proposed solution in open loop configuration is validated by finite element (FE) package ABAQUS both in the spatial domain and for the time-/frequency-dependent response.
However, alteration of a sequence of the 6 base pairs containing stem of MB allowed the design of pHSO probes that exhibited different dynamic pH range and possessed slightly different transition midpoint between i-motif and open loop configuration.
Many of these models consider only steady state analysis; the available dynamic models typically operate only in simple open loop configurations.
In terms of operational parameters: feed fluid velocity is important in open loop configurations due to the effect upon ammonia residence time at the membrane surface; and, ammonia concentration did not notably impact the mass transfer coefficient which was ca. 1 × 10−5 m/s until in excess of 2000 mg/L wherein the transport process diminished.
