The phrase "an enhancement in efficiency" is correct and usable in written English.
You can use it when discussing improvements or increases in productivity or effectiveness in a particular process or system.
Example: "The new software update resulted in an enhancement in efficiency, allowing the team to complete tasks more quickly."
Alternatives: "an improvement in efficiency" or "a boost in efficiency."
The results reveal a promising performance compared to the mechanical throttling, especially at part-load, with a drop in brake specific fuel consumption by 90 gm/kWh, an enhancement in volumetric efficiency by 40% and an increase in thermal efficiency by 12%.
In comparison with normal soil washing, washing electrokinetic two stage process showed an enhancement in removal efficiency by ≈16% via electromigration under optimum conditions using similar solution: soil ratio of <0.8 mL:1 g soil.
The addition of formic acid to the chemical bath of the Zn Ni deposit produces an enhancement in the efficiency of galvanostatic deposition when the pH of the bath is maintained at approximately pH 3.0.
The aim of the Enhanced COmpton SPectrometer proposal is to consider the synergic effects of both the physical design of the apparatus and data processing management, in order to obtain an enhancement in the efficiency of photon collection and a minimization of statistical needs.
Results at low frequency with the small reactor and the ferroelectric plate showed an enhancement in energy efficiency (e.g., it was multiplied by a factor of six and three for toluene and chloroform, respectively) and in removal yield (e.g., it increased from 22%to52%2% for chloroform and from 15% to 21% for methane).
A statistical analysis proves an enhancement in detection efficiency of more than 15% in a confocal and in a wide-field configuration.
A prerequisite to achieve an enhancement in the efficiency of the utilizing of carbon nanotubes in aqueous media is that the nanoparticles are finely dispersed.
We report an enhancement in the efficiency of organic solar cells via the incorporation of gold (Au) or silver (Ag) nanoparticles (NPs) in the hole-transporting buffer layer of poly 3,4-ethylenedioxythiophene):poly 3,4-ethylenedioxythiopheneSS), which was formed on an indium tin oxide (ITO) surface by the spoly styrenesulfonatePEDOT PSS Ag NPs composite solution.
However, although specialization has routinely been intertwined with an enhancement in the efficiency of a biological control agent, this question remains largely open.
An enhancement in the efficiency of MMEJ was observed with an increase in concentrations of Mg2+, a co-factor, optimum being 10 mM.
The reference DSSC had a short-circuit current density (Jsc) and power conversion efficiency (PCE) of 0.70 mA cm−2 and 0.18 %, respectively, while the cell with two SILAR Ag NPs incorporated into photoelectrode had a short-circuit current density (J sc) and power conversion efficiency (PCE) of 0.83 mA cm−2 and 0.22 %, respectively, representing a 22%% enhancement in efficiency.
