Sentence examples for an effective cross section of from inspiring English sources

Combining the above results and integrating eq 5 yields the following solution for sheet size: 6 eq 6 was first fit to the sheet size data in Figure 1 D, resulting in an effective cross section of σ = 1.4 ± 0.3 Å and a nucleation site density of f = 1.2 ±0.6) × 10 5.

The effective cross section of the flow channel without a wall coating was 15.9 mm × 25.4 mm.

The electrolyte composition influences the effective cross section of the diffusion process in the solid phase through its effect on the surface chemistry of the oxide cathode.

The 3D nanostructures would cause the incident light to converge, amplify the total absorption of excitation light and increase the effective cross section of Raman scattering.

During the reaction in the first layer, the effective cross section of filament will reduce and cause the variation of resistance in RRAM.

The effective cross section of such indirect Sm3+ excitation is several orders of magnitude higher than direct absorption cross section 10−21 to 10−20 cm2 of Sm3+ ions for the visible light [11].

The balance equations of all the isotopes involved in the fission process are solved in a simplified manner, and the one-group effective cross sections of all of them are obtained as functions of the radial position in the pellet, burnup, and enrichment in 235U.

The effective cross sections of the channels have been calculated.

The Reduced Cross-Section Method (RCSM) provides a popular method for the design of timber members exposed to fire, using an effective cross-section and mechanical properties at normal temperature.

The ILRS has therefore set a minimum effective cross-section of 100 million square metres for the on-board laser retro-reflector arrays (LRAs) and further recommends the use of 'uncoated' cubes in the arrays.

The effective cross-section of the carrier tube for powder carrying was found reduced.