The phrase "an average specific" is not correct and does not convey a clear meaning in written English.
It is unclear when to use it, as the combination of "average" and "specific" does not logically fit together in standard usage.
Example: "The study aimed to determine an average specific value for the measurements taken."
Alternatives: "a typical specific" or "an average particular".
The cell was cycled for over 230 cycles with an average specific capacity of about 95 mA h g−1.
Consequently, PANI/ND42 SiO2 exhibited an average specific capacitance of 380 F g−1, ca. 40% higher than that of PANI/SiO2 (276 F g−1).
The PANI-ND-MnO2 capacitor showed an average specific capacitance of ∼80 F g−1 and a stable coulombic efficiency of ∼98% over 1000 cycles.
The sample has an average specific tensile strength of 27.2 MPa g−1 cm3, an electrical conductivity of 1.62 × 105 S m−1 and a BET surface area of 98 m2/g.
Over the range of 1 20 wt% Au/C, the gold particle size distributions were similar with an overall average particle diameter of 4.6 nm and an average specific gold surface area of 43 ± 4 m2 g−1.
Strain ZJG13 (ΔsdhA, ΔackA-pta, ΔpoxB, ΔmgsA, ΔiclR) exhibited normal growth behavior and accumulated succinate with an average specific productivity of 0.50 mmol g CDW−1 h−1 during the fermentation.
PPTCUP is characterized by an averaged specific impulse of 655±58 s and a deliverable total impulse of 48.2±4.2 Ns.
The cake formed from slurry with a higher initial solid fraction tends to have a lower average solid fraction and a lower average specific resistance than is the case for lower initial slurry solid fractions.
It is also to be emphasized that the idea of a constant (average) specific heat,, is for illustration and not inherently part of the definition of adiabatic flame temperature.
Accordingly, Li/LiFePO4 cells with composite polymer electrolyte and PIL-functionalized mesoporous silica nanoplates exhibit remarkably improved discharged capacities and cyclabilities, compared to cells with plain PIL-based polymer electrolyte,displaying a higher average specific capacities at 40 and 60 °C, approximating to 228% and 152% enhancements after 100 cycles, respectively.
These TiO2 nanotube electrodes treated by the electrochemical hydrogenation doping (TiO2-H) exhibit a very high average specific capacitance of 20.08 mF cm−2 at a current density of 0.05 mA cm−2, ∼20 times more than the pristine TiO2 nanotube electrodes.
