Sentence examples similar to an acceptable bond from inspiring English sources

A significantly lower and clinically acceptable bond failure rate was demonstrated with Transbond Plus SEP after pumice prophylaxis.

Implicit in the formation of an acceptable adhesive bond is the ability of the adhesive to wet and spread on the adherends being joined.

Based on the numerical analysis of the test results, new criteria for acceptable bond performance of GFRP/steel wire composite rebars to concrete were developed.

Mean values of shear strength were similar to previous studies [40, 41] and were within the clinically acceptable bond strength range.

In clinical limitations where light curing from the same side of the bracket is not possible, doubling the curing time and increasing the light intensity during trans-illumination are recommended for achieving acceptable bond strengths.

This leads to the deduction that doubling the light curing time and increasing the light intensity to 800 mW/cm2[2] have to be done simultaneously in order to achieve acceptable bond strength values when using trans-illumination technique.

In clinical limitations where light curing from the same side of the bracket is not possible, doubling the curing time and increasing the light intensity to 800 mW/cm2 during trans-illumination with the LED light-curing unit can be done for attaining acceptable bond strength with minimum risk of overheat to the pulpal tissue.

In previous studies, SA cements have exhibited clinically acceptable bond strength to both zirconia [ 4, 5] and metal restorations [ 6].

The procedure of bonding orthodontic brackets to enamel requires completely dry and isolated fields to obtain clinically acceptable bond strengths, because of hydrophobic properties of bonding materials [ 1].

However, all new bonding approaches need to fulfill the requirement of acceptable bond strength, which ranges between 5.9 and 7.8 MPa [ 23].

The analysis of the shear bond strength indicates that all the adhesive systems and both pad designs tested in the present investigations provided clinically acceptable bond force levels (6 8 MPa) suggested by Reynolds [ 22].