Sentence examples for amount of working fluid from inspiring English sources

The heating time in turn depends on the amount of working fluid being loaded in the system initially.

The three major elemental parts of the rotating heat pipe are: a cylindrical evaporator, a truncated cone condenser, and a fixed amount of working fluid.

The curve of the capillary pumping amount of working fluid can be described as a function that increases exponentially over time.

The results showed that the capillary pumping amount of working fluid for both smooth and rough porous copper fiber sintered sheets initially increases rapidly, and then gradually attains a stable state.

Thus, a large amount of working fluids formed by the combination of groups can be directly screened by this model, and the optimal working fluids can be identified for a quick assessment in engineering field.

The flow of working fluid through the compressor results in a reduction in the specific volume of the fluid entering the second stage of compressors, with an attendant overall decrease in the amount of work needed for the compression stage.

The best combination of working fluids was selected through minimization of the amount of destroyed exergy by varying the flow rate, composition, and pressure of the working fluid.

Choi et al. [18] showed that addition of small amounts of less than 1% nanoparticles can double the thermal conductivity of working fluids.

Hence, in the present work, an optimum design has been outlined for a solar thermal water pump, both in terms of the amount of the working fluid to be loaded in the system and the optimum cooling coil area.

In conclusion, the total amount of thin film, working fluid level in structure, and effective thermal conductivity may be the factors affecting evaporative heat transfer and corresponding superheat in evaporators.

Energy transfer parameter is defined to assess the energy gain by the working fluid against the amount of solar energy absorbed by the blocks.