The phrase "amount of coolant" is correct and usable in written English.
It can be used when discussing the quantity of coolant needed or present in a system, such as in automotive or industrial contexts.
Example: "The technician checked the amount of coolant in the radiator to ensure the engine would not overheat."
Alternatives: "quantity of coolant" or "volume of coolant".
The algorithm finds the optimal cooling capacity of all channels (which directly minimizes the amount of coolant needed).
By comparing with other jet-impingement cooling approaches, the present method provides roughly four times more efficient cooling by using less amount of coolant.
Manifold microchannel (MMC) heat sinks have many advantages on low thermal resistance, compact structure, small amount of coolant, low flow rate, uniform temperature distribution along the flow direction, etc.
Design of experiments has been used to study the effects of the main flow-forming parameters such as the speed of the mandrel, the longitudinal feed, and the amount of coolant used on the surface roughness of flow-formed AA6061 tube.
A chemical called 1234yf was deemed suitable, and the tiny amounts of coolant in car air-conditioners make flammability and high cost less of a deterrent.
A thermodynamic cooling model was used to estimate the reasonable amount of turbine coolant needed to maintain the turbine blade temperature of each stage at a feasible level.
The surface roughness was found to increase with increase in the longitudinal feed and it decreased with decrease in the amount of the coolant used.
The results show that the amount of released coolant, the free volume and shell thickness of containment are dominant for containment pressure during the postulated accident, in comparison with the initial conditions.
The research presented here concerns the determination of the influence of the application of the MQL-CCA hybrid method that decreases the amount of the coolant applied during sharpening of the hob cutters on the condition of the cutting blades' surface layer.
We will just refer to this as % Find the amount of concentrated coolant in the system, this is CAP x % i.e. 12 x 25% is 3 liters Find the amount of concentrated coolant required, this is CAP x % or 12 x 50% i.e. 6 liters Add the amount of new Concentrated Coolant, this is 6 – 3 or 3 liters in this example Most Coolant is toxic to animals, dispose of properly.
If the amount of the primary coolant is the same as that of Slim-CS, the previous small Japanese DEMO, the discharged water does not damage the TCWSV with the volume and pressure-tightness similar to those of pressurized light water reactors.
