The phrase "ambient test" is correct and usable in written English.
It can be used in contexts related to testing environments, particularly in software or product testing where conditions are meant to simulate real-world usage.
Example: "Before launching the application, we need to conduct an ambient test to ensure it performs well under typical user conditions."
Alternatives: "environmental test" or "contextual test".
As expected, both coatings performed better on hard M2 substrates than Ti substrates under ambient test conditions.
Thirty-five setups were carried out in the ambient test to determine the mode shapes using six triaxial accelerometers.
Higher erosion rates were measured at 90° fiber orientation than at 0° at ambient test temperatures as reported in prior investigations.
Friction coefficient of UNCD films is found to be low in nitrogen and high in ambient test atmospheres using steel (100Cr6) and alumina (Al2O3) counter bodies.
Resting and exercise induced metabolic rate and scope, and sustained running speed were analysed by 3-way ANOVA with thermal acclimation and exercise as independent, fixed factors, and ambient test temperature at which trials were performed as repeated measure.
This paper presents six ambient tests on composite steel top-and-seat-and-web (TSW) angle joint specimens subject to monotonic loading.
This paper presents the results of research work on modal identification of Tsing Ma bridge ambient testing data by using an improved eigensystem realization algorithm.
Ambient tests of SCCOB performed following LPE showed that both translational and torsional periods of the building are smaller than those derived from strong motions.
Ambient tests performed following the retrofit of the building with visco-elastic dampers show that the structural fundamental mode frequency of the building has increased.
Sliding friction tests conducted on MLG in an ambient testing environment (45% RH) and under the same loading conditions showed that tribo-chemical mechanisms would differ depending on the counterface material.
Both the ambient and fire tests highlighted the occurrence of membrane action, either supporting loads higher than the theoretical yield-line load in the case of the ambient tests, or reaching higher failure temperatures compared to those calculated based on yield-line theory.
