Sentence examples for ambient form from inspiring English sources
The ambient form of Rh2O3 contains two relatively close Rh Rh distances at 2.72 and 2.99 Å (ratio 1 3), 43 whereas RhO2 has Rh Rh separations of 3.09 Å. 44 Both the high-temperature and high-pressure forms of Rh2O3 show Rh Rh separations of approximately 3.03 Å, 45, 46 and our observed distance is in the expected region for a Rh O Rh interaction.
An Au-coated GaAs substrate was loaded into the MOCVD reactor and annealed under AsH3 ambient to form Au-Ga alloy particles as catalyst.
Thereafter, a rapid thermal annealing was performed at 600°C for 5 s in a nitrogen ambient to form the Cu-NPs.
A systematic analysis of the interference of four umbrellalike beams (IFUB), including the symmetric IFUB where any two of three ambient beams form the same angle and the nonsymmetrical IFUB where this condition is not satisfied, is provided.
The characterisation at ambient and forming temperatures of PEI eight-harness satin reinforced laminates and PEI laminates reinforced with the new warp-knit structure is presented.
Pure ambient Au forms, in the order of decreasing particle size, a face-centered cubic (fcc) structure, an anomalous multiply twinned particle (MTP) of decahedral (Dh) and icosahedron (Ih) types [1, 2], and structural motifs of atom cluster with planar, cage, or pyramid structures [3 5].
Induced by the addition of n-heptane, the asphaltenes present in crude oil phase separate at ambient temperature to form aggregates of asphaltene-rich phase.
After drying the Si substrate at 373 K in ambient air (to form uniform Ni(NO3 2 film), some particles were evenly formed on the Si substrate.
After forming the Gd2O3 layer, all of the samples underwent RTA at 900°C for 30 s in ambient nitrogen to form the Gd2O3-NC [16].
Metal surfaces commonly oxidize in air at ambient temperatures to form a very thin oxide film (tarnish).
These microparticles were fused in presence of methanol at ambient temperatures to form scaffolds of different geometry having reasonable mechanical strength.
